edding in-line 12, Руководство пользователя, Страница: 35 / 40

Page 35
IMPORTANT!
For a perfect result, the UV lamp must be placed close to the product (3-6 mm distance to the
product) and the photocell for the UV lamp must be positioned at the height of the lamp!
Safety Notes
•
Do not look directly to the working UV lamp; if possible please wear UV light protection
goggles during operation.
•
UV lamp could reach high temperature, do not touch the UV lamp directly to avoid burn.
•
Keep all vent clear and not blocked to ensure the cooling system function properly.
•
Do not irradiate the same area of the substrate/objector production line for too long to avoid
damage caused by high temperature.
•
Keep UV lamp at least 25 cm away from the print head to avoid illumination onto the print
head nozzle and clog the nozzle.
•
Over curing will powderize the UV ink and could reduce adhesion.
•
Under curing will result in ink not fully dried and reduced adhesion.
Technical Specification
Control Unit
Power supply Power adapter: AC 100–240 V, 50/60 Hz
Maximum Output Power 320 W
UV Lamp
Wavelength 395 nm
Peak Irradiance 12 W / cm²
Curing Area 25 x 36 mm
Maximum Power 190 W