Furniture Wall Safety Strap
1
2
3
4
5
TOOLS NECESSARY: RUBBER MALLET AND PHILLIPS SCREW DRIVER ARE NOT INCLUDED.
NOTE: 3/8" DRILL BIT AND ELECTRIC DRILL ARE NOT PROVIDED.
PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE
USING THIS PRODUCT AND KEEP THESE INSTRUCTIONS FOR
FUTURE REFERENCE. IF YOU HAVE ANY QUESTIONS, PLEASE
CALL OUR CUSTOMER SERVICE NUMBER: (800) 295-1980.
LONG SCREW
1 PC
SAFETY WALL STRAP
1 PC
WALL ANCHOR
1 PC
MOUNTING BRACKET
2 PCS
SHORT SCREW
1 PC
WARNING: WHEN UPRIGHT, IT IS POSSIBLE THAT THE
FURNITURE MAY TIP OVER. PLEASE INSTALL THE
SAFETY WALL STRAP BEHIND THE FURNITURE TO
ENSURE SAFETY.
Step 2:
Step 3:
Step 1:
Determine where furniture is to be placed and mark location on the wall for the mounting bracket
(3), screw hole approximately 2" below the bracket mounted to the edge of the furniture.
Attach one of the mounting brackets (3) securely to the back edge of the furniture. Use the short
screw (4).
Drill a 3/8" hole in the wall. Press the wall anchor (2) into the hole and gently tap until the flange on
the anchor is against the wall surface.
Step 4:
Step 5:
Position the bracket (3) over the anchor (2) and use the long screw (5) to securely, attach the
bracket (3) to the wall.
Place the furniture so the bracket (3) on the back edge is in line with the bracket (3) on the wall.
Step 8:
Step 6:
Step 7:
Lace an end of the safety wall strap (1) down through each bracket (3). Bring both ends together
and slide the beaded end of the strap (1) through the keyhole shaped slot in the other end until
snug. Pull down on the beaded end until it snap locks into the keyhole slot.
To double lock return the beaded end back through the keyhole as shown.
Check to make sure the strap (1) is securely laced and locked to the brackets (3).
C
E
A
B
B
Email:[email protected]
