Remote CO2 Storage Safety Dual Alarm
with Oxygen Monitor
Operating Instructions
Model:
ES
RAD-200
Table of Contents
1. Product Instructions
2. Package Content Check & Main Unit View
3. LCD Display Symbol
4. SEU (Sensor Unit) Function Instructions
5. RDU (Remote Display Unit) Function Instructions
6. Safety Notes
7. Caring For Product
8. Installation Instructions
9. Customizing Settings
10. CO2 & O2 & Temperature Specifications
11. Relay Outputs
12. Weight & Dimensions
13. Fault Codes & Troubleshooting Guide
13.
Support & Warranty
1.
Product Instructions
Thank you for selecting the
ES
RAD-200 CO2 and O2 Monitor. It is designed
to
detect the presence of carbon dioxide and oxygen in the ambient air to
protect people in confined spaces. High concentrations of CO2 or low
concentrations
of oxygen in confined spaces are dangerous, and may lead to
health problems ranging from headaches and fatigue to asphyxiation and
death.
The RAD-0200 is widely used to protect workers and employees in CO2
storage areas, breweries, wineries, cellars, beverage dispensing areas, and
fast food outlets. It has both audible and visual alarms which activate when
CO2 or O2 concentrations reach user-defined levels. Detection of high levels
of
CO2 will also activate 2 relays that could be used for a fan or air-conditioning
system to ventilate the confined space, and reduce CO2 concentration and
add O2 concentration in the area.
The
ES
RAD-200 CO2 & O2 Monitor is cost-effective and has many features:
1.
Dual Beam NDIR (Non-Dispersive Infrared) technology is used to
measure CO2
concentration up to 50,000ppm (parts per million) and
electrochemical technology to measure O2 concentration up to 30%.
2.
With the SEU (Sensor Unit) and RDU (Remote Display Unit), it can
connect multiple RDUs for safety notices.
3.
Large LCD display clearly indicates ambient CO2& O2 concentrations.
4.
Relay outputs can control a fan to ventilate confined spaces.
5.
Audible and visual alarm indications.
6.
IP65 Water Proof Protection of SEU (Sensor Unit).
2.
Package Content Check & Main Unit View
The
ES
RAD-200 package comprises the following parts:
Main Unit:
Accessories:
Plug lock
1 pcs
Screw
10pcs
Expansion
plug
10 pcs
Nail cable clip
10 pcs Warning signs
2 pcs
SEU (Sensor Unit)
RDU (Remote Display Unit)
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
Q
R
S
T
U
V
W
X
Y
P
SEU( Sensor Unit)
RDU (Remote Display Unit)
Panel holders
User manual
8 meters (26 feet) communication cable
A. LCD display
I. Mode Button
B. Buzzer
J. Relay 2 output (red & white: NO,
Blue & white: NC)
C. Green LED (Power indication)
K. Relay 1 output (red & white: NO,
Blue & white: NC)
D. Red 1 LED( AL1 )
L. Communication Cable to RDU
E. Red 2 LED( AL2 )
M. Power Supply
F. Yellow LED( Fault indication)
N. CO2 entry
G. Reset Button
O. O2 entry
H. Enter Button
Z. Gas Calibration Port
P. Green LED (Power indication) U. Mode Button
Q. Red 1 LED (AL1 )
V. Enter Button
R. Red 2 LED ( AL2)
W. Buzzer
S. Yellow LED ( Fault indication) X. RJ45 Plug for next RDU (Output)
T. LCD display
Y. RJ45 Plug for SEU (Input)
|
Z
NOTE: Remove Air Intake Plug (N) before
powering SEU. Use Plug when cleaning SEU.
