PRODUCT SAFETY SOLUTIONS
© 2017 Educated Design & Development, Inc. All rights reserved. Rev C
Page 2 of 19
LEAKAGE CURRENT TESTER MODEL LT-952HC
IMPORTANT INSTRUCTIONS - RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
INTRODUCTION:
Thank you for choosing the ED&D LT-952HC. With proper use and care it will give many years of accurate
and reliable service. Upon receiving the unit please check for obvious physical damage to the packaging
material and the instrument itself. If any damage is evident, please immediately notify your ED&D
representative. We strongly recommend you keep all ED&D packaging for future shipping requirements.
Warnings:
CAUTION
CAUTION! LEAKAGE CURRENT TESTING IS INHERENTLY HAZARDOUS
RISK OF ELECTRIC SHOCK – KEEP HANDS AND FINGERS AWAY FROM ENERGIZED
COMPONENTS AT ALL TIMES
NO USER SERICEABLE PARTS INSIDE – SERVICING BY QUALIFIED SERVICE
PERSONNEL ONLY
Product purpose:
The LT-952HC leakage current tester is a state-of-the-art test instrument designed to measure leakage
current in accordance with national and international standards such as 60950, 60335, 6500, 61010, and
others based on IEC 60990.
LT-952HC is designed to make leakage current testing easy. Gone is the jumble of wires necessary to
simulate the prescribed test conditions. No more searching for an adequate meter to use. No more worries
about calibration or correlation with the testing agencies. The LT-952HC transforms what was once a one-
hour procedure into a quick and simple test.
Features that make the LT-952HC easy to use include: