EDAN INSTRUMENTS VE-1010 Скачать руководство пользователя страница 58

Страница: 58 / 79

VE-1010 Veterinary PC ECG User Manual Configuring the System

- 52 -

8.2.3 Setting Sampling Time

You can enter the normal ECG sampling time manually. The range is 10~600s.
You can enter the HRV sampling time manually. The range is 1~15min.
You can set the HRV analysis lead to one of the 6 leads (

, aVR, aVL, aVF) or 7 leads (

, aVR, aVL, aVF, V).

8.2.4 Setting Lead Sequence

You can set

Lead Sequence

Standard

Cabrera

, and the lead groups are displayed or

printed in the corresponding sequence listed in the following table.

Lead Sequence

Lead group 1

Lead group 2

Lead group 3

Standard

, II,

aVR, aVL, aVF

Cabrera

aVL,

, -aVR

II, aVF,

If the Lead Sequence is changed, click on

button to save the change, and enter the System

Setting interface again, the rhythm lead sequence of print format on the Printer Setting interface
will change correspondingly.

You can set

Lead Mode

6 Leads or 7 Leads.

You can set the

HR calculation

to one of the 6 standard leads:

, aVR, aVL, aVF or one of

the 7 standard leads:

, aVR, aVL, aVF, V.

8.2.5 Setting Background Grid

Select

Background Grid,

the grid on the background of the ECG sampling interface and Normal

Analysis interface will be displayed.
Deselect

Background Grid

, the grid on the background of the ECG sampling interface will not

be displayed.

8.2.6 Setting Anti-aliasing

Select

Anti-aliasing,

the system will automatically make the waveform smooth.

Deselect

Anti-aliasing,

the system will not make the waveform smooth.

8.2.7 Selecting QRS Voice

If you select

QRS Voice

, there will be a beep when an R wave is detected in succession.

Содержание VE-1010
















































































Результаты поиска

Содержание VE-1010

Отзывы:

EDAN INSTRUMENTS VE-1010, Руководство пользователя, Страница: 58 / 79

Результаты поиска

Содержание VE-1010

Отзывы: