EDAN Instruments
– SE-1010 PC ECG, Tango+ Interface Notes
Page 2 of 5
2. Connect the RS-232 Cable
From: The RS-232 connection on the rear panel of the Tango+.
To:
One of the COM ports on the back of the PC of the EDAN stress system
3. Connect the ECG Trigger Cable
From: The BNC External ECG connection (A) on the rear panel of the Tango+.
To:
The ECG Trigger cable connects to the port on the EDAN Stress System
4. Tango+ Monitor Setup
a. When the operating screen is displayed, press the
SELECT
button 2 times. This will bring
up the
MAIN MENU
screen.
b. Using the UP or DOWN arrows, highlight
MONITOR SET UP
and press the
SELECT
button.
c. Using the UP or DOWN arrows, highlight
STRESS SYSTEM
and press the
SELECT
button.
d. Using the UP or DOWN arrows, scroll through the list until
SUNTECH
is highlighted and
press the
SELECT
button to confirm the choice.
e. Using the UP or DOWN arrows, select
EXIT
twice to return to the operating screen.
5. EDAN System Setup
Please reference the EDAN User Manual pages 159-164 informational diagrams and images
for the information provided.
Tango+ Monitor
RS-232
Connection
(EDAN part
Connection B)
ECG Trigger
Connection
(EDAN part
Connection B)
