www.esynic.com
Page 10
Station mode and AP mode .
Station mode (Client mode )
:
it is the default
access way , the USB wireless adapter services as a client to
acess Internet through other router or AP.
AP mode :
it sets the USB wireless adapter as an
AP,which allows the other users can connect to Internet through
your computer. Before using the mode, it must be available that an
existed Internet connection via wire Ethernet connection or by 3G
wireless connection.
Tips
:
Point the cursor to the Ralink icon location on bottom-right
corner of your computer screen, right click the mouse, from the pop
up list, you can select the station mode or AP mode.
4) Below are the steps to connect to a wireless network using the
Ralink Utility.
a. Open the Ralink Utility by double-clicking on the Ralink Utility
icon in the taskbar.
b. The Ralink Utility appears ,by default connected to an available
open wireless network. Check the name of
the network to which
you are connected. If this is the correct network, no
father steps are required.
c.
To connect to an alternative network ,click the Available
Networks button.