3
®
BOX CONTENTS
• ECX
®
Micro Roost
®
Buggy (ECX00007T1/T2) or
ECX
®
Micro Ruckus
®
Monster Truck (ECX00008T1/T2)
• 2-CH Transmitter
• AA (4) Batteries
• 3.7V 200mAh 1S Lipo Battery (ECX10017)
SPECIFICATIONS
Transmitter
Frequency
2.404 MHz – 2476 MHz
Battery
AA x 4
Truck
Power Supply
One Cell 200mAh Li-Po
Run Time
10 min
INSTALLING TRANSMITTER BATTERIES
This transmitter requires 4 AA
batteries.
1.
Open the battery cover.
2.
Install the batteries as shown.
3.
Close the battery cover.
CAUTION:
NEVER remove the transmitter
batteries while the model is powered on. Loss
of model control, damage or injury may occur.
CAUTION:
If using rechargeable batteries,
charge only rechargeable batteries. Charging
non-rechargeable batteries may cause the batteries
to burst, resulting in injury to persons and/or
damage to property.
CAUTION:
Risk of explosion if battery is
replaced by an incorrect type. Dispose of
used batteries according to national regulations.
TRANSMITTER CONTROLS
1. ON/OFF Switch
Turns the power ON/OFF for the
transmitter
2. Bind Button
Connects transmitter to vehicle
3. Indicator Light
• Green light—
Indicates the transmitter is powered
on.
4. Steering Wheel
Controls direction (left/right) of
the model
5. Throttle Trigger
Controls speed and direction (for-
ward/brake/reverse) of the model
6. Indicator Light
• Red Charging light—
Indicates the transmitter
is connected to the vehicle and is charging the
battery.
7. ST Trim
Adjusts the steering center point
7
6
1
2
5
3
4
TRANSMITTER OPERATION
