ECUE Lighting Control Engine 2, Руководство по установке

Страница: 23 / 56

23
Setup Manual - Lighting Control Engine 2
Display settings
In the display settings you can change the contrast of the display. Use and
keys to select contrast or backlight settings. Press the key to enter the settings
dialogue
* Contrast *
Setup
Press RIGHT
Press the cursor key to enter the contrast
settings dialogue.
*Contrast Value *
11
®®®®®
Press UP/DOWN change
With the and keys change the contrast.
Set value with OK, return to the previous menu
with .
* Backlight *
Setup
Press RIGHT
Press the cursor key to enter the backlight
settings dialogue.
* Backlight Value *
ON
Press UP/DOWN change
With the and keys switch the backlight ON or
OFF. Set value with OK, return to the previous
menu with .
Visible devices
These subpages show the devices attached to the system from the Device
Manager of the LAS. Use and keys to select the device to display. Return to
the previous menu with . The following pages are examples.
* LCE2 I/O Inte... *
USB 33B663000000
The LCE2 I/O interface (dry contacts etc.)
The USB UID.