ECTACO SpeechGuard™ TL-4
User Manual
23
1.
Go to the
Setup
section by pressing the
Setup
button, or just tap
on the word
MENU
in the upper part of the screen and then select
Settings
in the appeared menu.
2.
Tap
or press the
Left
/
Right
buttons to open the
Advanced
Settings
screen.
3.
Under
Font size
, tap
Small
,
Medium
, or
Large
. A check mark
will indicate your selection.
4.
To apply your settings and exit the
Setup
section, tap
OK
in the
upper left of the screen or press the
Recognize
button.
Perform Adaptation
ECTACO SpeechGuard™ TL-4 uses the speaker-independent
speech-recognition technology. It means that regardless of the
pronunciation or speech characteristics, the majority of users will
be able to choose phrases by voice with equally good results.
To ensure the correct speech recognition, you can perform the
Adaptation
procedure during which the system adjusts to a
particular voice more precisely.
1.
Go to the
Setup
section by pressing the
Setup
button, or just tap
on the word
MENU
in the upper part of the screen and then select
Settings
in the appeared menu.
2.
Tap
or press the
Left
/
Right
buttons to open the
Advanced
Settings
screen.
3.
Tap
Adaptation
. You will see the
Speaker adaptation
screen.
4.
To record the adaptation phrase, tap
Record
and then read the
phrase displayed on the screen into the microphone. Tap
Play
to
listen to what you have recorded. It is important to listen to your
voice recorded in the initial steps of adaptation in order to exclude
any alien noises or adjust the recording level.
5.
Tap the
Next
button to switch to the next adaptation phrase
when you have recorded the previous one satisfactorily.
6.
To save the current adaptation data, tap
Save
. To exit
Adaptation
, tap
Close
. Next time you perform
Adaptation
, the
system will allow the adaptation process to start from the last
recorded phrase.
