ECTACO Partner
®
ER850
User Manual
9
LED status: blinking blue – recording is in progress or data being transferred; blinking
red – SD card is being scanned, or the battery is critically low.
Note:
Charge the battery overnight prior to the first use of the device.
SD Card
Before you start using your ECTACO Partner
®
ER850, please make sure the SD card
(included in the standard package) is installed into the
SD slot
of the device. If the card is
not installed, slide it into the slot located on the right-hand edge of the device – the
contacts of the card face up, label face down. Push the card gently until it clicks into
place. To eject the card, just push it in slightly.
PC Communication
The
PC Communication
function allows you to manage files and folders stored on the SD
card. For example, you may wish to add music files.
•
Ensure the SD card is installed into the device.
•
Turn the device on.
•
Connect the device to your PC using the special USB cable and the mini-USB port
located on the device (see
General View
).
Please wait while your PC detects the device. On the device screen, you will see the
Device is ready to work with PC
message.
•
Navigate to the newly detected removable disk on your PC to browse through the files
stored on the SD card.
Note:
Do not modify the content of the
system
folder. Do not delete system files.
•
To disconnect the device, just unplug the cable.
Note:
Always back up your important data! Neither the manufacturer nor the dealers
assume any responsibility for lost or corrupted data.
Initialization
In the rare event that the data on the screen is corrupted or a program is not responding
properly, you will need to perform a reset.
The
Reset
button is located on the left-hand side of the keyboard (over the
key). It
can be accessed with any thin object like a paper clip. Never use a needle or a sharp pin
for this purpose since it can damage the device.
•
Unscrew the removable cap of the stylus – it will serve you as a reset pin.
