Partner
model
EP586HT
176
talking function, and communication channels will be
disabled. To restore full functionality of the device and to
avoid risk of user’s data loss, replace the complete set of
batteries as soon as possible. Do not mix old and new
batteries.
•
Press the ON/OFF key to turn the unit off.
•
Remove the battery compartment cover by sliding it away
from the unit.
•
Remove the used batteries and replace them with new ones.
•
Make sure to place the batteries according to the polarity
markings (+ -) inside the compartment.
•
Put back the battery compartment cover by sliding it toward
the translator. Make sure the cover sits in place properly.
♦
Note:
You have 2 minutes to replace the batteries without
risk of losing data stored in RAM.
Do not exceed the 2
minutes limit!
Neither the manufacturer nor the dealer may
be held responsible for loss of user’s data.
Refer to page 177 for instructions if an initialization
message appears on the screen after replacing the
batteries.
♦
Note:
Don't remove old batteries from the unit unless you've
prepared a new set of batteries.
♦
Note:
Never try to remove batteries from the translator
when the power is on. This can seriously damage the
device. If you experience difficulty turning the unit off, press
the RESET button on the left-hand side of the keyboard
(next to the Q key) and reinstall the system. See page 177
for additional information.
♦
Note:
The Partner
is equipped with a jack for external
power supply. Contact your dealer to order the compatible
AC/DC adapter or call +1 (800) 710-7920 within the
continental US or (48) 22-844-1664 in Poland.
♦
Note:
Use of an inappropriate external power supply
may cause failure of the unit and void the warranty.