Partner
®
EKS430T
User's Manual
17
Software
y
Insert the supplied CD into the CD-ROM drive of a PC. If the installation
program does not start automatically, run the INSTALL.exe file from the CD
root catalog.
y
Choose
EKS430T PC-Link
from the menu displayed on the PC.
y
After the program is installed, start it from Start/Programs/Ectaco. The
icon will appear in the System Tray.
9
The latest version of the PC-Link software and additional dictionaries can be
downloaded from Ectaco's web site at www.ectaco.com
S ending and Receiving
y
Connect the PC-Link cable to the
PC-Link
jack located on the right-hand
edge of the device.
y
Enter the
PC communication
section.
y
Right click the PC-Link icon in the System Tray. In the PC-Link program,
select an appropriate data transfer mode.
9
Make sure to select an appropriate COM port.
9
Make sure you have no other PC-Link program running simultaneously with
EKS430T PC-Link.
y
Select the
Send data
transfer mode.
Press ENTER.
y
Choose the section(s) you wish to send. Use SPACE to check or uncheck a
section.
y
Press ENTER to start the transfer.
9
Start the data transfer first on the receiving device, then on the sending
device.
y
To receive data, select the
Receive data
transfer mode. Press ENTER and
the transfer will begin.
9
The time span between the data transfer startup on the PC and the device
must not exceed 30 sec.
9
Note that in the
Receive data
mode, the newly transferred data will replace
all the old information saved in the corresponding sections of your device.
9
Always back up your important data! Neither the manufacturer nor the
dealers assume any responsibility for lost or corrupted data.
