Partner
®
EER430T User’s
Manual
17
Right click the PC-Link icon in the System Tray. In the PC-Link program,
select an appropriate data transfer mode.
Make sure to select an appropriate COM port.
Make sure you have no other PC-Link program running simultaneously with
EER430T PC-Link.
Select the
Send data
transfer mode.
Press ENTER.
Choose the section(s) you wish to send. Use SPACE to check or uncheck a
section.
Press ENTER to start the transfer.
Start the data transfer first on the receiving device, then on the sending
device.
To receive data, select the
Receive data
transfer mode. Press ENTER and
the transfer will begin.
The time span between the data transfer startup on the PC and the device
must not exceed 30 sec.
Note that in the
Receive data
mode, the newly transferred data will replace
all the old information saved in the corresponding sections of your device.
Always back up your important data! Neither the manufacturer nor the
dealers assume any responsibility for lost or corrupted data.
Data transfer consumes a considerable amount of energy. Using an external
power supply is strongly advised.
SETUP
Personalize your EER430T and ensure good maintenance of your personal
records by selecting options in the
Setup
section.
Enter the
Setup
section.
Most of the
Setup
section options are very easy to adjust. Unless stated
otherwise, enter a subsection and select the desired option with , . Then
press ENTER to confirm your choice.
Interface language
The default interface language of the EER430T is English. You can switch
interface language between English, Estonian and Russian.
