Partner
®
EB400T User's
Manual
18
Software
y
Insert the supplied CD into the CD-ROM drive of a PC. If the installation
program does not start automatically, run the INSTALL.exe file from the CD
root catalog.
y
Choose
EB400T PC-Link
from the menu displayed on the PC.
y
After the program is installed, start it from Start/Programs/Ectaco. The
icon will appear in the System Tray.
9
The latest version of the
PC-Link
software and additional dictionaries can be
downloaded from Ectaco's web site at
www.ectaco.com
.
Sending and Rec eiv ing
y
Connect the
PC-Link
cable to the
PC-Link
jack located on the right-hand
edge of the device.
y
Press SHIFT+PC-LINK to enter the
PC communication
section.
y
Right-click the
PC-Link
icon in the System Tray. In the
PC-Link
program,
select an appropriate data transfer mode.
9
Make sure to select an appropriate COM port.
9
Make sure you have no other
PC-Link
program running simultaneously with
EB400T PC-Link
.
y
Select the
Send data
transfer mode.
Press ENTER.
y
Choose the section(s) you wish to send. Use SPACE to check or uncheck a
section.
y
Press ENTER to start the transfer.
9
Start the data transfer first on the receiving device, then on the sending
device.
y
To receive data, select the
Receive data
transfer mode. Press ENTER, and
the transfer will begin.
9
The time span between the data transfer startup on the PC and the device
must not exceed 30 sec.
9
Note that in the
Receive data
mode, the newly transferred data will replace
the old information saved in the corresponding sections of your device. In
case if empty sections are transferred, all data in the corresponding sections
of the
EB400T
will be erased.
