ECTACO Partner
®
EAF430TX User
Manual
18
Press ENTER to start the transfer.
Start the data transfer first on the receiving device, then on the sending
device.
To receive data, select the
Receive data
transfer mode. Press ENTER and
the transfer will begin.
The time span between the data transfer startup on the PC and the device
must not exceed 30 sec.
Note that in the
Receive data
mode, the newly transferred data will replace
the old information saved in the corresponding sections of your device. In
case if empty sections are transferred, all data in the corresponding sections
of ECTACO Partner
®
EAF430TX will be erased.
Always back up your important data!
Neither the manufacturer nor the
dealers assume any responsibility for lost or corrupted data.
It is recommended to use an external power supply while using the PC
communication function.
SETUP
Personalize your ECTACO Partner
®
EAF430TX and ensure good maintenance of
your personal records by selecting options in the
Setup
section.
Enter the
Setup
section.
Most of the
Setup
section options are very easy to adjust. Unless stated
otherwise, enter a subsection and select the desired option with , . Then
press ENTER to confirm your choice.
Interface Language
The default interface language of ECTACO Partner
®
EAF430TX is English.
You
can switch interface language between
English
,
Arabic
, and
French
.
Slang Lock
In this subsection you can hide slang words or phrases contained in the
dictionaries. For example, you may forbid your children to access slang.
Slang
lock
is on by default. To set slang lock off, enter the
showslan
password and
press ENTER.
