Partner
®
ArER430T User's
Manual
22
Schedule alarm
In this subsection you can turn the
Schedule alarm
ON or OFF. If turned on,
which is the default setting, the
Schedule alarm
will go off at the date and time of
the
Schedule
record, producing an audible beep.
Daily alarm
Enter the
Daily alarm
subsection.
The default values are midnight, 00:00, and OFF.
Use:
•
, to switch between hours and minutes
•
A, P to specify AM or PM
•
u
,
t
to turn the alarm ON/OFF.
Press ENTER to save changes.
If turned on, the
Daily alarm
produces a signal at the set time.
Press any key to interrupt the
Daily alarm
beep (otherwise, the beep will
continue for 30 seconds).
Memory check
Instantly check the free memory status with this
Setup
option.
Enter the
Memory check
subsection to check the remaining free memory.
Data deletion
The
Data deletion
subsection gives you the ability to free up memory resources
by deleting records much faster than removing them one by one.
Set password
With no password set (default) all functions of the ArER430T are freely
accessible. After a password has been set, the following sections may be locked
against unauthorized access:
Telephones, Schedule, User’s dictionaries, PC
communication, Data deletion, Security mode, Set password.
To gain access to any of these sections in the locked mode, a valid password
must be provided.
Enter the
Set password
subsection.
Specify a password up to 8 characters in length. Press ENTER.
