English-German-Polish Electronic Dictionary
User’s Manual
7
exceed the 2-minute limit!
Neither the
manufacturer nor the dealer may be held
responsible for loss of user data.
à
Make sure to align the batteries according to
the polarity marks (+ -) inside the
compartment.
à
Replace the battery compartment cover by
sliding it toward the unit. Make sure the cover
sits in place properly.
9
If the display blinks or becomes dim, you
should replace the batteries.
Initialization
The initialization routine is started
–
when the EGP230D is turned on for the
first time;
–
when you remove the batteries (e.g. during
replacement);
–
after the system has been reset with the
RESET button.
9
The RESET button is located on the left-hand
side of the reverse of the device. It can be
accessed with any thin object like a paper clip.
Never use a needle or pin for this purpose
since it can damage the unit.
à
If you see
Init system
?(
y/n)
, press the N button
to abort initialization and customization.