manualshive.com logo in svg

ECS Z270-LIGHTSABER, Руководство пользователя, Страница: 66 / 91

Поделиться
Скачать
ECS Z270-LIGHTSABER Скачать руководство пользователя страница 66

Chapter 3

Z270-LIGHTSABER USER MANUAL

59

Strong Weak Leaker (7)

Use this item to set the strong weak leaker value.

SelfRefresh Enable (Enabled)

Use this item to enable or disable the SelfRefresh.

Memory Scrambler (Enabled)

This item allows you to enable or disable the memory scrambler.

Fast Boot (Auto)

This item allows you to enable or disable the fast boot.

Memory Remap (Enabled)

This item allows you to enable or disable the memory remap above 4G.

Memory Thermal Management (Disabled)

This item allows you to enable or disable the memory thermal management.

DDR PowerDown and idle counter (BIOS)

This item allows you to BIOS or PCODE the DDR Power Down and idle counter. BIOS:

BIOS is in countrol of DDR CKE mode and idle timer value. PCODE: pcode will
manage the modes.

REFRESH_2X_MODE (Disabled)

This item allows you to enable or disable 

2xRef when warm and Hot 2-iMC enables

2xRef when Hot.

DLL Weak Lock Support  (Enabled)

This item allows you to enable or disable the DLL weak lock support.

Press <Esc> to return to the M.I.B. X Menu page.

Содержание Z270-LIGHTSABER




























































































Отзывы:

Нет отзывов