Wi-Bridge User Manual
Wi-Bridge Windows Control Application
Page 11
Wireless Network Configuration
To configure the wireless network for the Wi-Bridge device, you can follow the steps
listed below:
Step 1.
At first, plug in the Wi-Bridge device power adapter to the outlet and turn
on the device. If the device is working, skip this step.
Step 2.
When the Home Screen is displayed, press the [Menu] button on the
Remote Controller to show “Application Menu”.
Step 3.
Select the “WiFi Setting” item and press the [OK] button on the Remote
Controller to show the available wireless network list.
Step 4.
Use the [Up] or [Down] button on the Remote Controller to move the
selection bar.
Step 5.
Select the wireless network that you want to connect and press the [OK]
button. If the wireless network is protected with a password, the Password
Input screen will be shown. Otherwise, please go to Step 7.
Step 6.
Use navigation buttons to move the selection cursor and press the [OK]
button to input the selected character. After password input is complete, use
the navigation button to locate the [Enter] key and press the [OK] button to
submit the password.
Step 7.
The Wi-Bridge device will try to connect to the specified wireless network. If
it is successful, the wireless network information will be shown on the Home
Screen; otherwise, the original connection will be kept and shown on the
Home Screen.
Note: Please wait with patient when you change to Lan mode or AP mode cause it need some time to
scan the environment.
Содержание Wi-Bridge
Страница 1: ...Wi Bridge User Manual Ver 1 0...
