manualshive.com logo in svg

ECS SF2/648, Руководство пользователя, Страница: 46 / 60

Поделиться
Скачать
ECS SF2/648 Скачать руководство пользователя страница 46

 

42 

 Onboard SuperIO Device 

Scroll to this item and press <Enter> to view the following screen: 

Onboard FDC Controller (Enabled) 

This option enables the onboard floppy disk drive controller.   

Onboard Serial Port 1 (3F8/IRQ4) 

This option is used to assign the I/O address and interrupt request (IRQ) for 
onboard serial port 1 (COM1).   

Onboard Serial Port 2 (2F8/IRQ3) 

This option is used to assign the I/O address and interrupt request (IRQ) for 
onboard serial port 2 (COM2).   

Onboard Parallel Port (378/IRQ7) 

This option is used to assign the I/O address and interrupt request (IRQ) for 
the onboard parallel port.  

Parallel Port Mode (ECP) 

Enables you to set the data transfer protocol for your parallel port. There are 
four options: SPP (Standard Parallel Port), EPP (Enhanced Parallel Port), 
ECP (Extended Capabilities Port) and ECP+EPP. 

SPP allows data output only. Extended Capabilities Port (ECP) and Enhanced 
Parallel Port (EPP) are bi-directional modes, allowing both data input and output. 
ECP and EPP modes are only supported with EPP- and ECP-aware peripherals. 

ECP Mode Use DMA (3) 

When the onboard parallel port is set to ECP mode, the parallel port can use 
DMA 3 or DMA 1. 

Onboard 1394 Device (Enabled) 

Enable this item if you plan to use the 1394 device. 

Onboard LAN Device (Enabled) 

Enables and disables the onboard LAN. 

Содержание SF2/648





























































Отзывы:

Нет отзывов