ECS RS482M-M, Руководство пользователя, Страница: 49 / 90

43
Using BIOS
Onboard Parallel Port (378/IRQ7)
This option is used to assign the I/O address and interrupt request (IRQ) for the onboard
parallel port.
Press <Esc> to return to the Integrated Peripherals page.
Init Display First (PCI Slot)
Use this item to specify whether your graphics adapter is installed in one of the PCI
slots or is integrated on the motherboard. If a PCI graphics card is installed, the
onboard VGA will be disabled.
• Surroundview (Disabled): This item allows you to enable or disable
Surroundview function. Surroundview
TM
provides the power and conve-
nience of multiadapter, multimonitor support for computers that use an AGP or
PCI-E based graphics card in conjunction with ATI integrated graphics pro-
cessors.
Parallel Port Mode (SPP)
Enables you to set the data transfer protocol for your parallel port. There are four options:
SPP (Standard Parallel Port), EPP (Enhanced Parallel Port), ECP (Extended Capabilities
Port) and ECP+EPP.
• ECP Mode Use DMA (3): When the onboard parallel port is set to ECP mode,
the parallel port can use DMA 3 or DMA 1.
ACPI Suspend Type [S3(STR)]
HDD Power Down [Disabled]
Video Off Option [Susp, Stby --> Off]
Video Off Method [V/H SYNC+Blank]
MODEM Use IRQ [3]
Soft-Off by PWRBTN [Instant-Off]
Power After Power Fail [Off]
Resume Event Control [Press Enter]
Power Management Setup
This option lets you control system power management. The system has various power-
saving modes including powering down the hard disk, turning off the video, suspending
to RAM, and software power down that allows the system to be automatically resumed
by certain events.
Item Help
Menu Level
Phoenix-Award WorkstationBIOS CMOS Setup Utility
Power Management Setup
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
ACPI Suspend Type (S3(STR)
Use this item to define how your system suspends. In the default, S3 (STR), the suspend
mode is a suspend to RAM, i.e., the system shuts down with the exception of a refresh
current to the system memory.