manualshive.com logo in svg

ECS RS400-A, Руководство пользователя, Страница: 50 / 88

Поделиться
Скачать
ECS RS400-A Скачать руководство пользователя страница 50

44

Using BIOS

PNP/PCI Configurations

This section describes configuring the PCI bus system. PCI (Peripheral Component Inter-
connect) is a system, which allows I/O devices to operate at speeds nearing CPU’s when they
communicate with own special components. All the options describes in this section are
important and technical and it is strongly recommended that only experienced users should
make any changes to the default settings.

Reset Configuration Data

[Disabled]

Resources Controlled By

[Auto(ESCD)]

IRQ Resources

  Press Enter

PCI/VGA Palette Snoop

[Disabled]

Assign IRQ For USB

[Enabled]

Phoenix-AwardBIOS CMOS Setup Utility
              PnP/PCI Configurations

Item Help

ff

Menu Level

x

Reset Configuration Data (Disabled)

When you enable this item and restart the system, any Plug and Play configuration data
stored in the BIOS Setup is cleared from memory.

Resources Controlled By (Auto(ECSD))

You should leave this item at the default Auto(ESCD). Under this setting, the system
dynamically allocates resources to Plug and Play devices as they are required. If you cannot
get a legacy ISA (Industry Standard Architecture) expansion card to work properly, you
might be able to solve the problem by changing this item to Manual, and then opening up
the IRQ Resources submenu.

PCI/VGA Palette Snoop (Disabled)

This item is designed to overcome problems that can be caused by some non-standard VGA
cards. This board includes a built-in VGA system that does not require palette snooping so
you must leave this item disabled.

Assign IRQ For USB (Enabled)

“Enable” or “Disable” this item when users are to assign IRQ for the USB interface onboard.

In the IRQ Resources submenu, if you assign an IRQ to Legacy ISA, then that
Interrupt Request Line is reserved for a legacy ISA expansion card. Press
<Esc> to close the IRQ Resources submenu.

•

•

Date of Month

: Use this item to define the date of month when using the RTC

alarm to resume the system.

•

Resume Time

: Use this item to define the time when using the RTC alarm to

resume the system.

Press <Esc> to return to the Power Management Setup screen.

: Move         Enter: Select      +/-/PU/PD:Value     F10:Save     ESC:Exit   F1: General Help

mnlk

F5:Previous Values         F6:Fail-Safe Defaults        F7:Optimized Defaults

Содержание RS400-A

























































































Отзывы:

Нет отзывов