JP5: Supend-to-RAM jumper
Use this 3-pin jumper to enable the Suspend-to-RAM function.
Function
Jumper Cap
Enable Suspend-to-RAM
Short pins 1-2
Disable Suspend-to-RAM
Short pins 2-3
JP8: Set System Bus Frequency to 133 MHz
Use this 3-pin jumper to set the system bus frequency. In the normal
setting, the system automatically selects the correct frequency according
to the kind of processor installed. In the Force 133 MHz setting, the
system uses a 133 MHz system bus even if the processor is designed to
operate with a 66 or 100 MHz bus.
Function
Jumper Cap
Normal operation
Short pins 1-2
Force 133 MHz
Short pins 2-3
JP9: Set System Bus Frequency to 100 MHz
Use this 3-pin jumper to set the system bus frequency. In the normal
setting, the system automatically selects the correct frequency according
to the kind of processor installed. In the Force 100 MHz setting, the
system uses a 100 MHz system bus even if the processor is designed to
operate with a 66 or 133 MHz bus.
Function
Jumper Cap
Normal operation
Short pins 1-2
Force 100 MHz
Short pins 2-3
JP10: Automatic (BIOS) or Manual configuration
Use this 2-pin jumper to automatically (BIOS) or manually set the CPU
core voltage and system bus multiplier ratio. When set to manual
configuration, use the VID and BF jumpers to define proper
configuration. It is recommended that you set this jumper to automatic
configuration.
Function
Jumper Cap
Automatic configuration
Short pins 1-2
Manual configuration
Open pins 1-2
10
1 2 3
1 2 3
JP9
JP5
1 2 3
JP8
1 2
JP10