manualshive.com logo in svg

ECS P67H2-A4, Руководство пользователя, Страница: 47 / 92

Поделиться
Скачать
ECS P67H2-A4 Скачать руководство пользователя страница 47

41

Using BIOS

South Bridge

Scroll to this item and press <Enter> to view the following screen:

Restore AC Power Loss (Power Off)

This item enables your computer to automatically restart or return to its operating
status.

Audio Configuration

This item shows the information of the audio configuration.

Azalia HD Audio (Enabled)

This item enables or disables Azalia HD audio.

Case Open Warning (Disabled)

This item enables or disables the warning if the case is opened up, and the item below
indicates the current status of the case.

Chassis Opened (No)

This item indicates whether the case has been opened.

Press <Esc> to return to the chipset menu page.

+/-  : Value

Enter : Select

:Select Screen

:Select Item

          F1:General Help

Aptio Setup Utility - Copyright (C) 2010 American Megatrends, Inc.

          F2:Previous Value

          F3:Optimized Defaults

          F4:Save & Exit

          ESC:Exit

 

Version 2.02.1205. Copyright (C) 2010, American Megatrends, Inc.

Specify what state to go to
when power is re-applied after
a power failure (G3 state).

South Bridge

Restore AC Power Loss

[Power Off]

Audio Configuration
Azalia HD Audio

[Enabled]

Case Open Warning

[Disabled]

Chassis Opened

[No]

Main

    

 

Advanced

 

 

  Chipset 

    M.I.B III      Boot     Security     Save & Exit

Содержание P67H2-A4





























































































Отзывы:

Нет отзывов