manualshive.com logo in svg

ECS P55H-A, Руководство пользователя, Страница: 38 / 92

Поделиться
Скачать
ECS P55H-A Скачать руководство пользователя страница 38

32

Using BIOS

Advanced Setup

This page sets up more advanced information about your system. Handle this page
with caution. Any changes can affect the operation of your computer.

CMOS Setup Utility - Copyright  (C)  1985-2009, American Megatrends, Inc.

                   Advanced Setup

Thermal Management

Enabled

TM Status

TM1/TM2

Limit CPUID MaxVal

Disabled

Enhanced  Halt  (C1E)

Enabled

Intel XD Bit

Disabled

Intel VT

Enabled

Intel EIST

Enabled

Intel (R) TurboMode tech

Enabled

  

    Factory default TDC limit value : 760

      Factory default TDP limit value : 760

Quick Power on Self Test

Enabled

Boot Up Numlock Status

On

APIC Mode

Enabled

1st Boot Device

Hard Drive

2nd Boot Device

CD/DVD

3rd Boot Device

Removable Dev.

Boot Other Device

Yes

ECS eJIFFY Function

Disabled

CPU Thermal monitor.

Help Item

Enhanced Halt (C1E) (Disabed)

This item enables or disables enhanced halt.

: Move

F10: Save      ESC: Exit

+/-/: Value

Enter : Select

F9: Optimized Defaults

          F1:General Help

mnlk

Thermal Management (Enabled)

This item displays CPU’s temperature and enables you to set a safe temperature to
Prescott CPU.

TM Status (TM1/TM2)

This item displays CPU Monitor status.

Limit CPUID MaxVal 

 (Disabled)

Use this item to enable or disable the Max CPU ID value limit. When suppports
Prescott and LGA775 CPUs, enable this to prevent the system from “rebooting”
when trying to install Windows NT 4.0.

Enhanced Halt (C1E) (Enabled)

This item enables or disables enhanced halt (C1E).

Intel XD Bit (Disabled)

This item allows users to enable or disable the Intel XD bit.

Содержание P55H-A





























































































Отзывы:

Нет отзывов