Keyboard Power On
If you enable this item, you can turn the system on and off by pressing hot
keys on the keyboard. You must enable the Keyboard Power On jumper and
use an ATX power supply in order to use this feature.
Specific Key for PowerOn
When the Power On function is set to Password, use this item to set the
password.
PCI / Plug and Play Setup
This page sets some of the parameters for devices installed on the PCI bus
and devices that use the system plug and play capability.
AMIBIOS SETUP – PCI / PLUG AND PLAY SETUP
(C) 2000 American Megatrends, Inc. All Rights Reserved
Primary Graphics Adapter
PCI
OnChip VGA Mode Select
1MB
Allocate IRQ to PCI VGA
Yes
PCI IDE BusMaster
Disabled
ESC : Quit
↑↓←→
: Select Item
F1 : Help PU/PD/+/- : Modify
F5 : Old Values (Shift)F2 : Color
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
Primary Graphics Adapter
This item indicates if the primary graphics adapter uses the PCI or the AGP
bus. The default AGP setting still lets the onboard display work and allows the
use of a second display card installed in an AGP slot.
OnChip VGA Mode Select
This item provides the VGA mode with four options of 1MB, 8MB, Disabled or
512KB. We recommend you leave this item at the default value.
Allocate IRQ to PCI VGA
If this item is enabled, an IRQ will be assigned to the PCI VGA graphics sys-
tem. You set this value to No to free up an IRQ.
PCI IDE BusMaster
This item enables or disables the DMA under DOS mode. We recommend you
to leave this item at the default value.
31
