38
Using BIOS
M.I.B. (MB Intelligent BIOS)
This page enables you to set the clock speed and system bus for your system. The
clock speed and system bus are determined by the kind of processor you have installed
in your system.
Manufacturer: Intel
This item displays the information of current manufacturer of the CPU installed in
your computer.
Ratio Status/Ratio Actual Value
These items show the Locked ratio status and the actual ratio of the CPU installed in
your system.
Performance Level (Standard)
If the item is set to
Standard
, the system will run at its basic performance level. If the
item is set to
Enhanced
, the system will run at its good performance level and enable
overclocking function.
CPU Frequency Setting (333MHz)
This item is used to set the CPU Frequency.
Over-clocking Function. (Disabled)
This item decides the CPU over-clocking function/frequency installed in your sys-
tem. If the over-clocking fails, please turn off the system power. And then, hold the
PageUp key (similar to the Clear CMOS function) and turn on the power, the BIOS
will recover the safe default.
Auto Detect DIMM/PCI Clk (Enabled)
When this item is enabled, BIOS will disable the clock signal of free DIMM/PCI slots.
Spread Spectrum (Enabled)
If you enable spread spectrum, it can significantly reduce the EMI (Electro-Magnetic
Interference) generated by the system.
Memory Current Type (CL9/Trcd9/Trp9/Tras24)
This item is used to show the current memory type.
CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc.
M.I.B. (MB Intelligent BIOS)
Help Item
Manufacturer: Intel
Ratio Status: Unlocked (Min:06, Max:Unlimited)
Ratio Actual Value: 6
Performance Level Standard
CPU Frequency Setting :
333MHz
Over-clocking Function. : Disabled
Auto Detect DIMM/PCI CIK
Enabled
Spread Spectrum Enabled
Memory Current Type: CL9/Trcd9/Trp9Tras24
DRAM Frequency Auto
Configure DRAM Timing by SPD Enabled
CPU Base Voltage 1.0875V
CPU Voltage Normal
Memory Voltage
1.50V
NB Voltage 1.16V
: Move
F10: Save ESC: Exit
Enter : Select
+/-/: Value
F9: Load Default settings
F1: General Help
mn
< >
Standard
Enhanced
Options