manualshive.com logo in svg

ECS Motherboard, Руководство пользователя, Страница: 57 / 67

Поделиться
Скачать
ECS Motherboard Скачать руководство пользователя страница 57

33

Chapter 3: BIOS Setup Utility

Resume on RTC Alarm

The system can be turned off with a software command. If you
enable this item, the system can automatically resume at a fixed
time based on the system’s RTC (realtime clock). Use the items
below this one to set the date and time of the wake-up alarm. You
must use an ATX power supply in order to use this feature.

LAN/Ring Power On

The system can be turned off with a software command. If you
enable this item, the system can automatically resume if there is
an incoming call on the Modem/Ring, or traffic on the network
adapter. You must use an ATX power supply in order to use this
feature.

Keyboard Power On/Wake-Up Key

If you enable this item, system can automatically resume by
pressing any keys, hot or power key or typing in the password on
the keyboard. You must enable the Keyboard Power On jumper
and use an ATX power supply in order to use this feature.

Содержание Motherboard




































































Отзывы:

Нет отзывов