42
Power Button Override (Instant-Off)
Under ACPI (Advanced Configuration and Power management Interface) you
can create a software power down. In a software power down, the system can
be resumed by Wake Up Alarms. This item lets you install a software power
down that is controlled by the normal power button on your system. If the item
is set to Instant-Off, then the power button causes a software power down. If
the item is set to Delay 4 Sec. then you have to hold the power button down
for four seconds to cause a software power down.
PM Wake Up Events
Scroll to this item and press <Enter> to view the following screen:
CMOS Setup Utility – Copyright (C) 1984 – 2000 Award Software
PM Wake Up Events
Item Help
IRQ [3-7, 9-15], NMI
[Enabled ]
IRQ 8 Break suspend
[Disabled]
Ring Power Up Control
[Disabled]
PCIPME Power Up Control
[Enabled]
Hot Key Power Up Control
[Enabled]
USB Resume from S3
[Disabled]
KB Power ON Password
[Enter]
Power Up by Alarm
[Disabled]
x
Month Alarm
NA
x
Date (of Month)
0
x
Time (hh:mm:ss)
0 0 0
Menu Level
-
¯
®
¬
: Move
Enter : Select
+/-/PU/PD:Value:
F10: Save
ESC: Exit
F1:General Help
F5:Previous Values
F6:Fail-Safe Defaults
F7:Optimized Defaults
This item opens a submenu that enables you to set events that will resum e
the system from a power saving mode.
IRQ [3-7, 9-15], NMI (Enabled)
This option determines whether any activity for IRQ 3-7/9-15 will cause the
system to wake from a power saving mode.
IRQ 8 Break Suspend
Determines whether the system will monitor IRQ 8 activity and wake the sys-
tem from a power saving mode when IRQ 8 is activated.
Ring Power Up Control (Disabled)
Use this item to enable LAN or modem activity to wakeup the system from a
power saving mode.
PCIPME Power Up Control (Enabled)
Use this item to enable PCI activity to wakeup the system from a power sav-
ing mode.
Hot Key Power Up Control (Enabled)
Use this item to enable a hot key “[CTRL]+[ALT]+[BACKSPACE]” to wakeup
the system from a power saving mode.