ECS L4S5MG3/651 Plus, Руководство пользователя

Страница: 64 / 77

38
ECP Mode Use DMA (3)
When the onboard parallel port is set to ECP mode, the parallel port can use
DMA 3 or DMA 1.
Press <Esc> to return to the Integrated Peripherals screen.
USB Controller (Enabled)
Enable this item if you plan to use the Universal Serial Bus ports on this
motherboard.
USB Keyboard Support (Disabled)
Enable this item if you plan to use a keyboard connected through the USB port in
a legacy operating system (such as DOS) that does not support Plug and Play.
IDE HDD Block Mode (Enabled)
Enable this field if your IDE hard drive supports block mode. Block mode en-
ables BIOS to automatically detect the optimal number of block read and
writes per sector that the drive can support. It also improves the speed of ac-
cess to IDE devices.
Init Display First (PCI Slot)
Use this item to specify whether your graphics adapter is installed in one of
the PCI slots or is integrated on the motherboard.
AGP Auto Calibration (Enabled)
This item allows you to enable or disable the AGP buffer strength auto calibra-
tion through the chipset.
IDECHO/IDECH1 ACCESS INTERFACE (EDB Bus)
This item determines whether the IDE access interface is the PCI bus or the
embedded bus.
USB0/USB1/USB2 ACCESS INTERFACE (EDB Bus)
This option determines whether the USB0/USB1/USB2 access interface is the
embedded bus or the PCI bus.
USB2.0 ACCESS INTERFACE (EDB BUS)
This option determines whether the USB2.0 access interface is the embedded
bus or a PCI bus.
Audio ACCESS INTERFACE (EDB BUS)
This option determines whether the audio access interface is the embedded
bus or a PCI bus.