USB0/USB1/USB2 ACCESS INTERFACE (EDB Bus)
This option determines whether the USB0/USB1/USB2 access interface is the
embedded bus or the PCI bus.
USB2.0 ACCESS INTERFACE (EDB BUS)
This option determines whether the USB2.0 access interface is the embedded
bus or a PCI bus.
Audio ACCESS INTERFACE (EDB BUS)
This option determines whether the audio access interface is the embedded
bus or a PCI bus.
Power Management Setup
This option lets you control system power management. The system has vari-
ous power-saving modes including powering down the hard disk, turning off
the video, suspending to RAM, and software power down that allows the sys-
tem to be automatically resumed by certain events.
Power Management Timeouts
The power-saving modes can be controlled by timeouts. If the system is inac-
tive for a time, the timeouts begin counting. If the inactivity continues so that
the timeout period elapses, the system enters a power-saving mode. If any
item in the list of Reload Global Timer Events is Enabled, then any activity on
that item will reset the timeout counters to zero.
Wake Up Calls
If the system is suspended, or has been powered down by software, it can be
resumed by a wake up call that is generated by incoming traffic to a modem, a
LAN card, a PCI card, or a fixed alarm on the system realtime clock,
Phoenix – AwardBIOS CMOS Setup Utility
Power Management Setup
Item Help
ACPI
function
[Enabled]
ACPI Suspend Type
[S1(POS)]
Video Off Option
[Susp, Stby --> Off]
Video Off Method
[DPMS Supported]
MODEM Use IRQ
[Auto]
Hot Key Function as
[Power Off]
PS2KB Wakeup from S3
[Hot key]
USB S3 Wakeup Function
[Disabled]
HDD Off After
[Disabled]
Power Button Override
[Instant-Off]
Power State Resume Control
[Always Off]
PM Wake Up Events
[Press Enter]
Delay Prior to Thermal
[None]
Menu Level
↑
↓
→
←
: Move Enter : Select
+/-/PU/PD:Value: F10: Save ESC: Exit F1:General
Help F5:Previous
Values
F6:Fail-Safe Defaults
F7:Optimized Defaults
39