manualshive.com logo in svg

ECS L4IGEA2, Руководство пользователя, Страница: 38 / 51

Поделиться
Скачать
ECS L4IGEA2 Скачать руководство пользователя страница 38

 

34 

This option enables the onboard floppy disk drive controller.   

Onboard Serial Port 1 (3F8/IRQ4) 

This option is used to assign the I/O address and interrupt request (IRQ) for 
the onboard serial port 1 (COM1).   

Onboard Parallel Port (378/IRQ7) 

This option is used to assign the I/O address and interrupt request (IRQ) for 
the onboard parallel port.  

Parallel Port Mode (ECP) 

Enables you to set the data transfer protocol for your parallel port. There are 
four options: SPP (Standard Parallel Port), EPP (Enhanced Parallel Port), 
ECP (Extended Capabilities Port), and ECP+EPP.  

SPP allows data output only. Extended Capabilities Port (ECP) and Enhanced 
Parallel Port (EPP) are bi-directional modes, allowing both data input and output. 
ECP and EPP modes are only supported with EPP- and ECP-aware peripherals. 

EPP Mode Select (EPP 1.7) 

The onboard parallel port is EPP spec. compliant, after you choose the on-
board parallel port with EPP function. Set the EPP version to 1.7 spec or 1.9 
spec. 

ECP Mode Use DMA (3) 

When the onboard parallel port is set to ECP mode, the parallel port can use 
DMA 3 or DMA 1. 

 

 

 

 

 

 

 

 

 

 

Power Management Setup  

Содержание L4IGEA2




















































Отзывы:

Нет отзывов