ECS kt600-a Скачать руководство пользователя страница 66 | Manualshive

Страница: 66 / 75

ECS kt600-a Скачать руководство пользователя страница 66

44

counters when any activity is detected on the serial ports, or the parallel port.

HDD & FDD (ON)

When this item is enabled, the system will restart the power-saving timeout
counters when any activity is detected on the hard disk drive or the floppy
diskette drive.

PCI Master (OFF)

When set to Off, any PCI device set as the Master will not power on the sys-
tem.

Resume By PCI PME (Disabled)

Use this item to enable PCI activity to wakeup the system from a power sav-
ing mode.

Resume by Ring (Disabled)

An input signal on the serial Ring Indicator (RI) line (in other words, an incom-
ing call on the modem) awakens the system from a soft off state.

RTC Alarm Resume (Disabled)

When set to Enabled, additional fields become available and you can set the
date (day of the month), hour, minute and second to turn on your system.
When set to 0 (zero) for the day of the month, the alarm will power on your
system every day at the specified time.

IRQs Activity Monitoring

Scroll to this item and press <Enter> to view the following screen:

Phoenix – AwardBIOS CMOS Setup Utility

IRQs Activity Monitoring

Item Help

Primary INTR

[ON]

IRQ 3 (COM2)

[Enabled]

IRQ 4 (COM1)

[Enabled]

IRQ 5 (LPT2)

[Enabled]

IRQ 6 (Floppy Disk)

[Enabled]

IRQ 7 (LPT1)

[Enabled]

IRQ 8 (RTC Alarm)

[Disabled]

IRQ 9 (IRQ2 Redir)

[Disabled]

IRQ 10 (Reserved)

[Disabled]

IRQ 11 (Reserved)

[Disabled]

IRQ 12 (PS/2 Mouse)

[Enabled]

IRQ 13 (Coprocessor)

[Enabled]

IRQ 14 (Hard Disk)

[Enabled]

IRQ 15 (Reserved)

[Disabled]

Menu Level

↑

↓

→

←

: Move Enter : Select

+/-/PU/PD:Value:

F10: Save ESC: Exit F1:General Help

F5:Previous Values

F6:Fail-Safe Defaults

F7:Optimized Defaults

This screen enables you to set IRQs that will resume the system from a power
saving mode.

Set any IRQ to Enabled to allow activity at the IRQ to wake up the system
from a power saving mode.

Press <Esc> to return to the Power Management Setup screen.

«
...
64
65
66
67
68
...
»

Содержание kt600-a












































































Отзывы:

Нет отзывов