Load Optimal Settings
If you select this item and press
Enter
a dialog box appears. If you press
Y
,
and then
Enter
, the Setup Utility loads a set of fail-safe default values. These
default values are not very demanding and they should allow your system to
function with most kinds of hardware and memory chips.
Note:
It is highly recommended that users enter this option to load optimal val-
ues for accessing the best performance.
Load Best Performance Settings
If you select this item and press
Enter
a dialog box appears. If you press
Y
,
and then
Enter
, the Setup Utility loads a set of best-performance default val-
ues. These default values are quite demanding and your system might not
function properly if you are using slower memory chips or other low-
performance components.
Features Setup Page
This page sets some of the parameters for peripheral devices connected to
the system.
AMIBIOS SETUP – FEATURES SETUP
(C) 2000 American Megatrends, Inc. All Rights Reserved
OnBoard FDC
Enabled
OnBoard Serial PortA
3F8h/COM1
OnBoard IR Port
Disabled
OnBoard Parallel Port
378h
Parallel Port Mode
ECP
Parallel Port IRQ
7
Parallel Port DMA
3
OnBoard PCI IDE
Both
Audio Device
Enabled
Modem Device
Enabled
Ethernet Device
Enabled
USB Function Support
Enabled
USB Function for DOS
Disabled
ThumbDrive for DOS
Disabled
ESC : Quit
↑↓←→
: Select Item
F1 : Help PU/PD/+/- : Modify
F5 : Old Values (Shift)F2 : Color
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
OnBoard FDC
Use this item to enable or disable the onboard floppy disk drive interface.
OnBoard Serial PortA
Use these items to enable or disable the onboard COM1/2 serial port, and to
assign a port address.
OnBoard Ir Port
Use this item to define the protocol for an infrared port if you have installed an
optional IR port. The options are IrDA and ASKIR.
Onboard Parallel Port
Use this item to enable or disable the onboard LPT1 parallel port, and to as-
sign a port address. The Auto setting will detect and available address.
30
