manualshive.com logo in svg

ECS H67H2-M4, Руководство пользователя

Поделиться
Скачать
ECS H67H2-M4 Скачать руководство пользователя страница 5

1

Introducing the Motherboard

Chapter 1

Introducing the Motherboard

Introduction

Thank you for choosing the H67H2-M4 motherboard. This motherboard is a high
performance, enhanced function motherboard designed to support the LGA1155
socket for

 

2

nd

 Generation Intel

®

 Core

TM 

Family/Pentium

®

/Celeron

®

 processors for

high-end business or personal desktop markets.

This motherboard is based on Intel

® 

H67 Chipset for best desktop platform solution.

H67 is a single-chip, highly integrated, high performance Hyper-Threading periph-
eral controller, unmatched by any other single chip-device controller. This
motherboard supports up to 16 GB

 

of system memory with

 dual channel DDR3 1333/

1066 SDRAM

.  High resolution graphics via PCI Express x16 slot, intended for

Graphics Interface, is fully compliant to the PCI Express Base Specification revision
2.0. In addition, three PCI Express x1 slots are supported. It implements an EHCI
(Enhanced Host Controller Interface) compliant interface that provides twelve USB
2.0 ports (six USB 2.0 ports at the back panel and three USB 2.0 headers support
additional six USB 2.0 ports). The gray USB 2.0 header provides EZ charger technol-
ogy, please reference chapter 2 parts of Front Panel USB headers to check the detail
information. H67H2-M4 implements extra USB 3.0 chip which provides two USB
3.0 ports* at rear I/O with blue connectors also.

The motherboard is equipped with advanced full set of I/O ports in the rear panel,
including one PS/2 mouse keyboard combo connector, one optional DVI port or
HDMI port, one D_sub (VGA) port, one Lan port, six USB 2.0 ports, two USB 3.0
ports running at 5 Gb/s, and audio jacks for microphone, line-in and 8 channel line-
out.

In addition, this motherboard supports two SATA 6Gb/s connectors and four SATA
3Gb/s connectors for expansion.

*The USB 3.0 connectors are optimized for SuperSpeed USB 3.0 devices,
aslo are fully backwards-compatible with Hi-Speed USB 2.0 devices.

*Please use USB 2.0 ports if you want to boot in DOS mode.

Содержание H67H2-M4



























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды