ECS H61H2-A Скачать руководство пользователя страница 60

Страница: 60 / 88

Using BIOS

Boot Override

Use this item enables you to set the device order.

Save Options

This item enables you to save the options that you have made.

Save Changes

This item enables you to save the changes that you have made.

Discard Changes

This item enables you to discard any changes that you have made.

Restore Defaults

This item enables you to restore the system defaults.

Save as User Defaults

This item enables you to save the changes that you have made as user defaults.

Restore User Defaults

This item enables you to restore user defaults.

Discard Changes and Exit

This item enables you to discard any changes that you have made and exit.

Save Changes and Reset

This item enables you to save the changes that you have made and reset.

Discard Changes and Reset

This item enables you to discard any changes that you have made and reset.

Содержание H61H2-A

























































































Результаты поиска

Содержание H61H2-A

Отзывы:

ECS H61H2-A, Руководство пользователя, Страница: 60 / 88

Результаты поиска

Содержание H61H2-A

Отзывы: