manualshive.com logo in svg

ECS H55H-M, Руководство пользователя, Страница: 7 / 70

Поделиться
Скачать
ECS H55H-M Скачать руководство пользователя страница 7

3

Introducing the Motherboard

Audio

This motherboard may support either of the following Audio chipsets:

The motherboard comes with the following expansion options:

  •

One PCI Express slot for Graphic Interface

  •

Two PCI Express x1 slots

  •

One 32-bit PCI v2.3 compliant slot

  •

Six 7-pin SATA connectors

Expansion Options

  •

One combo port for mouse and keyboard

  •

One serial port

  •

One DVI port

  •

One VGA port

  •

Six USB ports

  •

One LAN port

  •

Audio jacks for microphone, line-in and line-out

The motherboard has a full set of I/O ports and connectors:

Integrated I/O

  •

5.1 Channel High Definition Audio Codec

  •

Exceeds Microsoft Windows Logo Program (WLP) Requirements

  •

ADCs support 44.1K/48K/88.2K/96K/192KHz sample rate

  •

Power Support: Digital: 3.3V; Analog: 5.0V

1.Some hardware specifications and software items are subject to change
without prior notice.

2.Due to chipset limitation, we recommend that motherboard be oper-
ated in the ambiance between 0 and 50

° C

.

The firmware can also be used to set parameters for different processor clock
speeds.

•

Power management

•

Wake-up alarms

•

CPU parameters

•

CPU and memory timing

BIOS Firmware

This motherboard uses AMI BIOS that enables users to configure many system
features including the following:

Содержание H55H-M







































































Отзывы:

Нет отзывов