ECS H11H4-I, Руководство пользователя, Страница: 18 / 26

18
Installing the Motherboard
DIO: 4 bit GPIO header
1 SIO_GPIO0_Input 6 SIO_GPIO6_Output
2 SIO_GPIO4_Output 7 SIO_GPIO3_Input
3 SIO_GPIO1_Input 8 SIO_GPIO7_Output
4 SIO_GPIO5_Output 9 +5VSB
5 SIO_GPIO2_Input 10 GND
LVDSPW_CON: LVDS_POWER Connector
1
12V
2
GND
3
BACK LIGHT ENABLE
4
BACK LIGHT CONTROLL
5
5V
Pin Function
Pin Signal Name Pin Signal Name
SATA1~2: Serial ATA 6.0Gb/s connector
This connector is used to support the Serial ATA devices for the highest data transfer
rates (6.0 Gb/s), simpler disk drive cabling and easier PC assembly.
1
Ground
2
TX+
3
TX-
4
Ground
5
RX-
6
RX+
7
Ground
8
No pin
Pin Signal Name Pin Signal Name
CASE: Opened Chassis detective header
This detects if the chassis cover has been removed. This function needs a chassis
equipped with intrusion detection switch and needs to be enabled in BIOS.
Pin Signal Name
1 GND
2 Case open