ECS H11H4-I Скачать руководство пользователя страница 1

1

Introducing the Motherboard

Chapter 1

Introducing the Motherboard

Introduction

Thank you for choosing the H11H4-I motherboard. This motherboard is a high
performance, enhanced function motherboard designed to support Intel Skylake
processors for high-end business or personal desktop markets.

This motherboard is based on integrated Intel Chipset for best desktop platform
solution.

 

Skylake is a dual-core processor. The chipset for Skylake is highly inte-

grated and high performance. Moreover, Skylake will feature DirectX11.1-compli-
ant GCN-based graphics and support Win8 and UEFI Secure Boot. This motherboard
supports up to 16 GB

 

260pin SO-DIMM memory with

 dual-channel DDR4 2133

(1GB/ 2GB/ 4GB/ 8GB) SDRAM

. One PCI Express x16 slot is supported, is fully

compliant to the PCI Express Base Specification revision 2.0. One Mini PCIE is also
supported. It implements an EHCI (Enhanced Host Controller Interface) compliant
interface that provides four USB 2.0 ports (two USB 2.0 headers support additional
four USB 2.0 ports and one port is supported by mPCIE 2.0 USB signal) and four USB
3.0 ports at the rear panel.

The motherboard is equipped with advanced full set of I/O ports in the rear panel,
including PS/2 mouse and PS/2 keyboard connectors, two Serial ports (COM), one
VGA port, two Lan ports, four USB 3.0 ports, one HDMI port and audio jacks for
line-out and Mic-in.

In addition, this motherboard supports two SATA 6.0Gb/s connectors.

Содержание H11H4-I



























Отзывы: