ECS GWS-BTI2, Быстрое руководство, Страница: 7 / 10

Note:
1. A DC 24V power supply from device or sensor is necessary for the AI port.
2. If DO is designed to drive a relay, a diode must been applied to the relay’s coil side.
Item Description
1.3 Cleaning/Disinfecting
During normal use GWS-BTI2 may become soiled and should, therefore, be cleaned regularly.
Steps:
1. Wipe GWS-BTI2 with a clean cloth that has been moistened in the cleaning solution.
2. Prepare agent per manufacturer’s instructions or hospital protocol.
3. Wipe thoroughly with a clean cloth.
Caution! Do not immerse or rinse GWS-BTI2 or its peripherals. If you accidentally spill
liquid on the device, disconnect the unit from the power source. Contact your
Biomed personnel regarding the continued safety of the unit before placing it
back in operation.
Do not spray cleaning agent on the chassis.
Do not use disinfectants that contain phenol.
Do not autoclave or clean GWS-BTI2 or its peripherals with strong aromatic,
chlorinated, ketone, ether, or other solvents, sharp tools or abrasives. Never
immerse electrical connectors in water or other liquids.
GWS-BTI2 Ruggedized Intelligent Gateway 4
Attention! Ne pas immerger ou rincer GWS-BTI2 ou ses périphériques. Si vous
renversez par accident un liquide sur l'appareil, débranchez l'appareil de la
source d'alimentation. Contactez votre Biomed concernant la sécurité
Gerneral I/ O Interface
˙Certification FCC,CE,UL,BSMI ˙Serial Ports RS232/485 (M12 connector)
˙Dimension 312 x 216 X 44.5 mm ˙LAN Dual 10/100/1000 Base-T (M12 connectorx2)
˙Enclosure Aluminum ˙USB Ports USB 3.1 (M12 connector) / USB 2.0 (M12 connector)
˙Mounting DIN-rail,Wallmount, VESA ˙VGA Port VGA, 1600x1200 @60Hz (M12 connector)
˙Power Consumption 60W (Typical)
˙Power Requierments 9~36VDC (e.g +24V@3A) (Min. 72W),AT
˙Weight 3.0kg
˙OS Support Windows 10 IOT core, Ycoto Linux
˙System Design Fanless
System Hardware Envirom ent
˙CPU On Board ATOM Bay trial-I E3825 1.33GHz ˙Humidity 95% @ 40℃(non-condensing)
˙Memory DDR3L 2GB On Board ˙Operating Temperature -20~60℃(-4~140℉) @5~85%RH (with air flow)
˙Indicators LED for Power, LoRa,LAN (Active,Status) ˙Storage Temperature -20~60℃(-4~140℉)
˙Storage eMMC : Up to 32GB ˙Shock Protection IEC 60068-2-27
HDD: Support One 2.5" SATA HDD eMMC:50G @ wall mount, half sine, 11ms
˙Display 1xVGA, 1600x1200 @60Hz HDD:20G @ wall mount, half sine, 11ms
˙Audio Not Support ˙Vibration Protection IEC 60068-2-64(Random 10ct./min, 1hr/axis.)
˙Watchdog Timer Programmable level timer interval, from 1to 255 sec eMMC : 2 Grms @ 5~500Hz,
˙Mini PCIe Expansion 2xFull-size w/USB/routing (Wifi / BT / 3G / Zigbee ) HDD: 1 Grms @5~500Hz
˙GWS-BTI2 Intel ATOM Bay trial-I E3825 1.33GHz Box Computing ˙Adaptor
˙GWS-BTI2-SH GWS-BTI2 with extend 2xDI/ 2xDO /1xRS232/1xRS485 ˙Wi-Fi Module
˙GWS-BTI2-TS GWS-BTI2 with extend 2x10/100Mbps LAN/2xDI/2xDO ˙Attena
˙GWS-BTI2-EN GWS-BTI2 with extend 2xRS232/2xRS485 with isolate ˙Wall Bracket
˙GWS-BTI2-LR GWS-BTI2 with 16 channel LoRa Base Station
Specifications
Ordering Information Accessories