ECS GeForce 6100PM-M2 Скачать руководство пользователя страница 48

Страница: 48 / 70

Using BIOS

SuperIO Device (Press Enter)

Scroll to this item and press <Enter> to view the following screen:

Phoenix-Award WorkstationBIOS CMOS Setup Utility

Super IO Device

Onboard FDC Controller (Enabled)

This option enables the onboard floppy disk drive controller.

Onboard Serial Port 1 (3F8/IRQ4)

This option is used to assign the I/O address and interrupt request (IRQ) for onboard
serial port 1.

Item Help

Menu Level

Onboard FDC Controller

[Enabled]

Onboard Serial Port 1

[3F8/IRQ4]

Onboard Parallel Port [378/IRQ7]
Parallel Port Mode [SPP]

ECP Mode Use DMA 3

Press <Esc> to return to the Integrated Peripherals page.

F5:Previous Values F6: Fail-Safe Defaults F7:Optimized Defaults

: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help

Parallel Port Mode (SPP)

Use this item to select the parallel port mode. You can select Normal (Standard
Parallel Port), ECP (Extended Capabilities Port), EPP (Enhanced Parallel Port), or
BPP (Bi-Directional Parallel Port).

Onboard Parallel Port (378/IRQ7)

This item enables or disables the onboard parallel port, and assigns a port address. The
Auto setting will detect the available address.

•

ECP Mode Use DMA (3)

When the onboard parallel port is set to ECP

mode, the parallel port can use DMA3/1.

Содержание GeForce 6100PM-M2







































































Результаты поиска

Содержание GeForce 6100PM-M2

Отзывы:

ECS GeForce 6100PM-M2, Руководство пользователя, Страница: 48 / 70

Результаты поиска

Содержание GeForce 6100PM-M2

Отзывы: