ECS G43T-M3, Руководство пользователя, Страница: 36 / 52

30
Using BIOS
1st/2nd/3rd Boot Device (Hard Drive/CD/DVD/Removable Dev.)
Use this item to determine the device order the computer used to look for an
operating system to load at start-up time. The devices showed here will be different
depending on the exact devices installed on your motherboard.
APIC Mode (Enabled)
This item allows you to enable or disable the APIC (Advanced Programmable Inter-
rupt Controller) mode. APIC provides symmetric multi-processing (SMP) for sys-
tems, allowing support for up to 60 processors.
Boot Other Device (Yes)
Press <Esc> to return to the main menu setting page.
When enabled, the system searches all other possible locations for an operating
system if it fails to find one in the devices specified under the First, Second and Third
boot devices.
Boot Up Numlock Status (On)
This item defines if the keyboard Num Lock key is active when your system is
started.
Advanced Chipset Setup
This page sets up more advanced information about your system. Handle this page
with caution. Any changes can affect the operation of your computer.
CMOS Setup Utility - Copyright (C) 1985-2008, American Megatrends, Inc.
Advanced Chipset Setup
DRAM Frequency Auto
Configure DRAM Timing by SPD Enabled
PAVP Mode Lite
Pre-allocated share mem 64MB
DVMT Memory 256MB
Memory Remap Feature Enabled
HPET Enabled
Help Item
Options
Auto
667 MHz
800 MHz
mnlk
: Move
F10: Save ESC: Exit
Enter : Select +/-/: Value
F9: Load Default Settings F1: General Help
Configure DRAM Timing by SPD (Enabled)
DRAM Frequency (Auto)
This item enables users to adjust the DRAM frequency. The default setting is auto and
we recommend users leave the setting unchanged. Modify it at will may cause the
system to be unstable.
When this item is set to enable, the DDR timing is configured using SPD. SPD (Serial
Presence Detect) is located on the memory modules, BIOS reads information coded
in SPD during system boot up.