ECS G41T-M2 Скачать руководство пользователя страница 6

2

Introducing the Motherboard

Feature

The motherboard uses an LGA775 type of Intel

®

 Core

TM

 2 Quad/Core

TM

 2 Duo/

Pentium

®

 Dual-Core/Celeron

®

 processors that carries the following features:

Processor

Intel

®

 Core

TM

 2 Quad/Core

TM

 2 Duo/Pentium

®

 Dual-Core/Celeron

®

 pro-

cessors

Supports a system bus (FSB) of 1333/1066/800 MHz

Supports “Hyper-Threading” technology CPU

“Hyper-Threading” technology enables the operating system into thinking it’s
hooked up to two processors, allowing two threads to be run in parallel, both on
separate “logical” processors within the same physical processor.

The Intel

®

 G41 Northbridge (NB) and Intel

®

 ICH7 Southbridge (SB) chipsets are

based on an innovative and scalable architecture with proven reliability and
performance.

Chipset

G41 (NB)

ICH7 (SB)

Memory

Enhanced DMA Controller, interrupt controller, and timer

functions

Compliant with PCI Express Base Specification, Revi-

sion 1.0a

Compliant with PCI v2.3 specification

Integrated SATA 3.0 Gb/s Host Controller

Integrated USB 2.0 Host Controller supporting up to

eight USB 2.0 ports

Integrated IDE controller supports Ultra ATA 100/66/33

Supports 36-bit host bus addressing, allowing the CPU

to access the entire 64 GB of the memory address
space

2 GB/s point-to-point Direct Media Interface (DMI) to

ICH7 (1 GB/s each direction)

Supports 2-GB, 1-Gb, 512 Mb DDR2 DRAM technolo-

gies for x8 and x16 devices

One, 16-lane (x16) PCI Express port intended for ex-

ternal device attach, fully compatible to the PCI Ex-
press Gen 1

An integrated graphics device (IGD) delivering cost

competitive 3D, 2D and video capabilities

Microsoft DX10 and 128MB share memory are sup-

ported

Supports DDR2 800/667 DDR2 SDRAM with Dual-channel architec-

ture

Accommodates two unbuffered DIMMs

2 x 240-pin DDR2 DIMM sockets support up to 8 GB

This board supports CPU up to 95W TDP.

Содержание G41T-M2



































































Отзывы: