ECS G320, Руководство пользователя

Страница: 51 / 103

Loading a Disc
To play a CD disc, follow the instructions listed below.
1.
2.
3.
1.
2.
3.
4.
Push the CD/DVD-ROM/Combo eject button on the CD drive door. Gently pull the tray
all the way out.
Carefully lift the CD disk by the edges and make sure the shiny surface is face down (the
side with no writing on it). Carefully insert the CD onto the tray. Push the CD/DVD-
ROM down gently so that it snaps onto the center ring.
Push the tray back into the drive.
To remove a disk, do the following:
Check the LED display and make sure that the computer is not accessing the DVD-ROM
drive.
Push the eject button and pull the tray all the way out.
Carefully pick up the CD disk by the edges and – while pressing down on the center ring –
remove the CD/DVD-ROM/Combo from the tray.
Do not insert any foreign objects into the disc tray. If you experience difficulty when
ejecting the CD disk tray, stretch a paper clip (or use a pin or a thin metal rod) and insert it
into the emergency eject hole located on the right side of the front panel. The CD disk tray
should eject immediately. This procedure can also be used to remove a CD from the drive
when the Notebook is powered off.
Power Saving Modes
This section contains information on the Notebook’s power system, including the AC
Adapter, the battery system, recharging the battery, and tips for conserving battery power.
The power system is comprised of two parts, the AC Adapter and the battery system. The
AC Adapter converts AC power from a wall outlet to the DC power required by the computer.
49