ECS EVEm Series, Руководство пользователя, Страница: 37 / 48

3: BIOS Setup Utility
33
Video Off
Option This option defines if the video is powered
down when the system is put into suspend
mode.
Video Off
Method This item defines how the video is powered
down to save power.
MODEM Use
IRQ If you want an incoming call on a modem to
automatically resume the system from a power-
saving mode, use this item to specify the
interrupt request line (IRQ) that is used by the
modem. You might have to connect the
fax/modem to the mainboard Wake On Modem
connector for this feature to work.
Soft-Off by
PWRBTN
Under ACPI (Advanced Configuration and
Power management Interface) you can create a
software power down. In a software power
down, Wake Up Alarms can resume the system.
This item lets you install a software power down
that is controlled by the normal power button on
your system. If the item is set to Instant-Off,
then the power button causes a software power
down. If the item is set to “Delay 4 Sec.” then
you have to hold the power button down for
four seconds to cause a software power down.
State After
Power Failure Use this item to set a system power state when
power restores after sudden AC power loss.
Keyboard
Power On
Use this item to enable or disable the keyboard
power on function.
Wake Up
Events This item opens a submenu that enables you to
set events that will resume the system from a
power saving mode. Select Wake Up Events
and press
Enter to display the following items:
VGA, LPT & COM, HDD & FDD, PCI Master,
PowerOn by PCI Card, Wake Up On
LAN/Ring, RTC Alarm Resume, Primary
INTR, and IRQs Activity Monitoring.