ECS A890GXM-A Скачать руководство пользователя страница 37 | Manualshive

Страница: 37 / 74

ECS A890GXM-A Скачать руководство пользователя страница 37

33

Using BIOS

Integrated Peripherals

This page sets up some parameters for peripheral devices connected to the system.

SATA Configuration (IDE)

Use this item to show the Serial ATA Configuration options: Disabled, Compatible,
Enhanced.

Onboard AUDIO Function (Enabled)

Use this item to enable or disable the onboard Audio function.

Onboard LAN Function (Enabled)

Use this item to enable or disable the onboard LAN function.

Onboard LAN Boot ROM (Disabled)

Use this item to enable or disable the booting from the onboard LAN or a network
add-in card with a remote boot ROM installed.

Press <Esc> to return to the main menu setting page.

Onboard SATA Mode (Enabled)

Use this item to enable or disable the onboard SATA mode.

USB Functions (Enabled)

Use this item to enable or disable the USB function.

Legacy USB Support (Enabled)

Use this item to enable or disable support for legacy USB devices. Setting to Auto
allows the system to detect the presence of USB device at startup. If detected, the
USB controller legacy mode is enabled. If no USB device is detected, the legacy USB
support is disabled.

CMOS Setup Utility - Copyright (C) 1985-2005, American Megatrends, Inc.

Integrated Peripherals

Onboard SATA Mode

Enabled

SATA Configuration

IDE

SATA 6.0 Gbps Support

Enabled

Onboard AUDIO Function

Enabled

Onboard LAN Function

Enabled

Onboard LAN2 Function

Enabled

Onboard LAN Boot ROM

Disabled

USB Functions

Enabled

Legacy USB Support

Enabled

Help Item

F10: Save ESC: Exit

+/-/: Value

Enter : Select

F9: Optimized Defaults

F1:General Help

: Move

mnlk

Options

Disabled
Enabled

Onboard LAN2 Function (Enabled)

Use this item to enable or disable the onboard LAN2 function.

«
...
35
36
37
38
39
...
»

Содержание A890GXM-A











































































Отзывы:

Нет отзывов