ECS A85F2-A DELUXE, Руководство пользователя, Страница: 47 / 74

Chapter 3
A85F2-A DELUXE (GOLDEN) USER MANUAL
43
This page enables you to set the clock speed and system bus for your system. The
clock speed and system bus are determined by the kind of processor you have
installed in your system.
M.I.B X (MB Intelligent BIOS X) Menu
Memory Timing Configuration (Auto)
This item shows the information of Memory Timing.
CAS# Latency (tCL) (9)
This item determines the operation of DDR SDRAM memory CAS (colulmn address
strobe). It is recommended that you leave this item at the default value. The 2T
setting requires faster memory that specifically supports this mode.
Core clock multiplier
Main Advanced Chipset M.I.B X Boot Security Exit
+/- : Change Opt.
Enter/Dbl Click : Select
lk
mn
: Select Screen
/Click: Select Item
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit
Memory Clock (Auto)
This item is used to set memory clock.
Core clock multiplier (Auto)
This item is used to set Core clock multiplier.
Command Rate (1T)
This item shows the information of command rate.
Row Precharge Time (tRP) (10)
This item specifies Row precharge to Active or Auto-Refresh of the same bank.
RAS# to CAS# Delay (tRCD) (9)
This item specifies the RAS# to CAS# delay to Rd/Wr command to the same bank.
Core clock multiplier Auto
Memory Clock Auto
Memory Clock is (DDR3-1333/667Mhz)
Memory Timing Configuration Auto
Command Rate 1T
CAS# Latency (tCL) : 9
RAS# to CAS# Delay (tRCD) 9
Row Precharge Time (tRP) 10
RAS# Active Time (tRAS) 24
Read CAS# Precharge (tRTP)
5
Row Cycle Time (tRC) 33
Write Recovery Time (tWR)
10
Active to Active Delay (tRRD) 4
Write to Read Delay (tWTR) 5
Four Active Window Delay (tFAW)
20
Row Refresh Cycle Time 0 (tRFC0) 4
Row Refresh Cycle Time 1 (tRFC1) 3
Row Refresh Cycle Time 2 (tRFC2) 4
Row Refresh Cycle Time 3 (tRFC3) 4
SB Spread Spectrum Enabled
CPU Over-clocking Func.
Disabled
Spread Spectrum Disabled
IGD Over-clocking Func.
Disabled
CPU Voltage Default