ECS A770M-A, Руководство пользователя, Страница: 40 / 54

34
Using BIOS
Onboard IDE Controller (Enabled)
Use this item to enable or disable the onboard IDE interface.
Onboard SATA Mode (Enabled)
Use this item to enable or disable the onboard SATA mode.
SATA Configuration (IDE)
Use this item to show the Serial ATA Configuration options.
Onboard AUDIO Function (Enabled)
Use this item to enable or disable the onboard audio device.
Onboard JMB361 Function (Enable)
Use this item to enable or disable the onboard JMB361 function.
Onboard JMB361 Mode (Enable)
Use this item to enable or disable the onboard JMB361 mode.
OnBoard LAN Function (Enabled)
Use this item to enable or disable the onboard LAN function.
OnBoard LAN Boot ROM (Disabled)
Use this item to enable or disable the booting from the onboard LAN or a network
add-in card with a remote boot ROM installed.
Serial Port1 Address (3F8&IRQ4)
Use this item to enable or disable the onboard COM1/2 serial port, and to assign a
port address.
USB Functions (Enabled)
Use this item to enable or disable the USB function.
Legacy USB Support (Enabled)
Use this item to enable or disable support for legacy USB devices. Setting to Auto
allows the system to detect the presence of USB device at startup. If detected, the
USB controller legacy mode is enabled. If no USB device is detected, the legacy USB
support is disabled.
Integrated Peripherals
This page sets up some parameters for peripheral devices connected to the system.
CMOS Setup Utility - Copyright (C) 1985-2007, American Megatrends, Inc.
Integrated Peripherals
Onboard IDE Controller Primary
Onboard SATA Mode Enabled
SATA Configuration
IDE
Onboard AUDIO Function Enabled
OnBoard JMB361 Funtion Enable
OnBoard JMB361 Mode AHCI
Onboard LAN Function
Enable
Onboard LAN Boot ROM Disabled
Serial Port1 Address 3F8/IRQ4
USB Functions Enabled
Legacy USB Support Enabled
DISABLED: disables the
integrated IDE
Controller.
PRIMARY: enables only
the Primary IDE
Controller.
SECONDARY: enables
only the Secondary IDE
Controller.
BOTH: enables both IDE
Controllers.
Help Item
Press <Esc> to return to the main menu setting page.
: Move F10: Save +/-/: Value Enter : Select
F9: Optimized Defaults F1:General Help
mnlk
ESC: Exit