manualshive.com logo in svg

ECS A75F2-M2, Руководство пользователя, Страница: 36 / 70

Поделиться
Скачать
ECS A75F2-M2 Скачать руководство пользователя страница 36

Chapter 3

A75F2-M2 USER MANUAL

32

Smart Fan Mode (Normal)

This item allows you to select the fan mode (Normal, Quiet, Silent, or Manual) for a
better operation environment. If you choose Normal mode, the fan speed will be
auto adjusted depending on the CPU temperature. If you choose Quite mode, the
fan speed will be auto minimized for quiet environment. If you choose Silent mode,
the fan speed will be auto restricted to make system more quietly. If you choose
Manual mode, the fan speed will be adjust depending on users’ parameters.

Press <Esc> to return to the PC Health Status page.

      

•

CPU Tct1

      

•

CPU Fan Speed

      

   •

CPU Voltage

      

•

DIMM Voltage

         

•

PCH Voltage

System Component Characteristics

These items display the monitoring of the overall inboard hardware health events,
such as System temperature, CPU & DIMM voltage, CPU & System fan speed... etc.

Press <Esc> to return to the Advanced Menu page.

Содержание A75F2-M2







































































Отзывы:

Нет отзывов